|Message: Doubt about simulation type||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Sorry for the question and the bad English, but I'm not sure if this is possible
to do with Geant4, so here we go:
I have to do a simulation of a cylinder filled with SiO_2 with the corresponding
natural concentrations of each Si isotope. The cylinder will be exposed to a
neutron source whose density is 10^13 neutrons per square centimeter, with
What I need is after a certain amount of time, store the differences between the
initial and final concentration of each Si isotope.
I don't know if this type of simulation using Geant4 is achievable, and if so how
do I use data from exposure time, half-lives and density of the source.
Thanks in advance.
|Inline Depth:||Outline Depth:||Add message:|