Message: How to set ApplyCut to ON? Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

Question How to set ApplyCut to ON? 

Keywords: ApplyCut
Forum: (Graphical) User Interfaces
Date: 19 Dec, 2005
From: <zhangqm@ihep.ac.cn>

In the Geant4 User's Guide, The following content is mentioned: ....................................................................... ApplyCut is OFF: do nothing. All the secondaries are stacked (and then tracked later on), regardless of their initial energy. The Geant4 kernel respects the best that the physics can do, but neglects the overall coherence and the efficiency. Energy conservation is respected as far as the processes know how to handle correctly the particles they produced! ApplyCut in ON: the TrackingManager checks the range of each secondary against the production threshold and against the safety. The particle is stacked if range > min(cut,safety). ....................................................................... In the passage in this forum, the following content is mentioned: ..................................................................... The ApplyCut is Off by default, and needs to be On with /run/particle/applyCuts. ......................................................................

but I can't find the interface method in run.

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

1 None: Re: How to set ApplyCut to ON?   (vnivanch@mail.cern.ch - 19 Dec, 2005)
2 None: Re: How to set ApplyCut to ON?   (michel maire - 22 Dec, 2005)
 Add Message Add Message
to: "How to set ApplyCut to ON?"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews


[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]