|Message: SOLVED Re: Crash of program in interactive mode after call to G4UIExecutive||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I am sorry for the delayed reply. I was busy with other things for a while...
I tried your suggestion to rebuild Geant4 with the option -DCMAKE_BUILD_TYPE=RelWithDebInfo, which means an optimized build with debugging symbols. This solved the problem, that is after rebuilding my program it does not crash in interactive mode on the computer where it crashed when I had built Geant4 with the options -DCMAKE_BUILD_TYPE=Debug (debugging symbols, no optimization).
Thanks a lot for your advice!