|Message: Change whole geometry between runs||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have a question which is similar to the one described in the "Run management during geometry change" thread. I am simulating a PB/Scintillator sampling calorimeter and I would like to be able to change my geometrical setup between runs. This include: - changing thickness and/or number of lead and scintillator layers - changing the thickness of the aluminum support structure - changing the size/shape of the layers - etc.etc. I do not think that this is easily handled by using the method described in the A01 example, where a single physical volume is modified with a call to the SetTranslation method and the the RunManger is notified with GeometryHasBeenModified. I would rather erase the whole geometry after each run and re-create it with the new parameters. What is the correct way to do this? Thanks Emanuele Leonardi
|Inline Depth:||Outline Depth:||Add message:|