|Message: Geant4 randomly stops mid-simulation (during batch run)||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Not super hopeful on this one, but I thought I'd ask to see if anyone had had similar experiences.
I'm performing a batch run of a number of different simulations using a macro to slightly vary the GPS parameters for each run. It works great until a random point somewhere in the first 20 /run/beamOn events, then the terminal freezes and will not unfreeze for love nor money.
It *appears* that the simulation crashes while calling a modified EventAction class, but for the life of me I can't seem to figure out why, especially since the exact same class has worked perfectly for literally hundreds of stand alone runs. Anybody ever seen this before? Know any work arounds?
Thanks, -D. Hodge
|Inline Depth:||Outline Depth:||Add message:|