|Message: /gps/source/list not showing energy of ions||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hello, assume I have following .mac input file /gps/source/clear /gps/source/add 6.0086 /gps/particle ion /gps/ion 6 12 /gps/energy 5200 MeV /gps/direction 0 0 1 /gps/pos/type Beam /gps/pos/rot1 1 0 0 /gps/pos/rot2 0 1 0 /gps/pos/shape Circle /gps/pos/centre 0. 0. -40. cm /gps/pos/radius 3.1 cm /gps/source/add 3.6101 /gps/particle ion /gps/ion 6 12 /gps/energy 5188 MeV /gps/direction 0 0 1 /gps/pos/type Beam /gps/pos/rot1 1 0 0 /gps/pos/rot2 0 1 0 /gps/pos/shape Circle /gps/pos/centre 0. 0. -40. cm /gps/pos/radius 3.1 cm /gps/source/list But if I see the output (stdout) I see something like this: The number of particle sources is: 2 Multiple Vertex sources: 0 Flat Sampling flag: 0 source 0 with intensity: 6.0086 Num Particles: 1; Particle type: C12 Energy: 1 MeV Direction: (0,0,1); Position: 0 0 -40 cm Angular Distribution: planar Energy Distribution: Mono Position Distribution Type: Beam; Position Shape: Circle source 1 with intensity: 3.6101 Num Particles: 1; Particle type: C12 Energy: 1 MeV Direction: (0,0,1); Position: 0 0 -40 cm Angular Distribution: planar Energy Distribution: Mono Position Distribution Type: Beam; Position Shape: Circle All my energies are set to 1 MeV inside this output. Adding /run/initialize before /gps/source/list call not helping. The real application after /run/beamOn sees all the energies correctly and work as intended though, but for some reasons I need to analyze the stdout of app and I'd rather see the proper output (if possible).
|Inline Depth:||Outline Depth:||Add message:|