|Message: Bus Error, Mac OSX||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hello, I am fairly new to geant (about 8 months working with it). I am running geant4.7.p01 on Mac OSX version 10.4.7 I have managed to set up a two detector geometry using liquid scintillator and have set up hadronic and electromagnetic physics lists (LHEP_PRECO_HP). I've managed to run some sanity checks and it seems like everything is working as it should. Recently it came time for me to do some actual simulations so I fired in a monoenergetic pencil beam of 2 MeV neutrons using the GPS package. After about 2500 events the entire program crashed with a bus error, no other explanation was given. The run was done in a bash script and ran twice more, once for a very thin detector and once for a very thick detector. On the thin detector I recieved the same bus error message at 2800 interactions, on the thicker detector run it ran to completetion at 30,000 events. This leads me to believe the bus error is somehow related to my geometry but I cannot figure out how. Since I will need to run at 500,000 to 1,000,000 events soon need to sort this out, the sooner the better. Any help would be greatly appreciated and if you need any more information about my program in order to help let me know and I'll see what I can do. Thanks in advance.
|Inline Depth:||Outline Depth:||Add message:|