|Message: Is there a bug or limitation in the cuts for region?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I used two regions in my code. After I set cuts for these regions separately, I can only see the cuts for one region in the cutvaluetable, which can be demonstrated with TestEm10(where the cut values for radiator are not shown).
The problem in my case is: not only I cannot dump the cuts in one of the regions, but the cuts work in a very strange way. The value of it does not affect the trajectories at all (they look alike when the cut changes from 1 nanometer to 5 cm for penelopemodel of 50keV electron ). But if I commented out the cuts setting for the region, the trajectories look like as they should do, which is evidently different from what they do when cuts are set. Besides, when I tried to get the default cuts using aRegion->GetProductionCuts(), the program ends unexpectedly, without error information.
Do you have any idea on this issue? Thank you. My Geant is G4-10.2.2.
|Inline Depth:||Outline Depth:||Add message:|