|Message: Re: UserSpecialCut applied to all particles||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
You're right, thanks. However, the problem doesn't happen in the overloaded step limiter, but in another one, which is not overloaded.
On Sun, 15 Nov 2015 18:21:19 GMT, Vladimir Ivanchenko wrote:
> Hello, > > you not need to instantiate two step limiters at the time - choose one and instantiate it as a DiscreteProcess. > > However, even if you overdoing the result should be the same if limits in both limiters are the same. > > VI >