|Message: Cut per region defined for a region but it seems to be applied to the world volume.||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Dear Geant4 experts,
I defined a region in my Detector Construction class (attached). As I am using a packaged physics list, QGSP_BIC_HP, I have defined cut for region in a macro file. However, when I run the simulation it seems the cut for region has overwritten the cut for the world volume too. I've attached a screen shot of terminal too. Could you please advise where I am going wrong? Also I have defined step max in my detector construction class, does this also need to be defined in macro file? Could you confirm if my defined step max is not going to be overwritten by Packaged Physics list?
Many thanks, Leila
Attachment: http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2015/05/12/00.05-7099-DetectorConstruction.png http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2015/05/12/00.05-66481-Terminal.png http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2015/05/12/00.05-23199-fullRun.mac
|Inline Depth:||Outline Depth:||Add message:|