|Message: Fluorescence lines missing||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
i've tried to produce characteristic X-rays and Bremsstrahlung in a 200nm thick gold coating on a 200micrometer thick beryllium window.
But all i can get is a Bremsstrahlung spectrum. The characteristic X-rays from Gold are missing. I've tried every possible physics model. At least for Penelope and Livermore the fluorescence should be automatically activated. I used 18keV electrons to produce these X-Rays.
Attached is my PhysicsList and my DetectorConstruction.
Could it be a problem with the detector, the Cutoffs, ...? I've really no idea where i make the mistake. Any help would be very appreciated!
Attachment: http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2010/11/10/06.10-81705-lDetectorConstruction.pdf http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2010/11/10/06.10-56796-rearwallPhysicsList.pdf
|Inline Depth:||Outline Depth:||Add message:|