|Message: Re: cut in range too big for material||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
First of all, thank you for your interest.
I akways use the default cut value (1mm). I checked several times MyDetectorConstruction class and I only define three materials. Exucution is run via a run macro that, for what concerns verbosity, is the same that the one implemented for example N03. (I attach it here - it is a .txt file because this forum does not allow me to upload .mac files) The output file I attached in my first message shows correct Materials-Cuts Couples.