|Message: cut in range too big for material||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Here a short description of my application:
My primaries are 100 MeV proton beam, collimated passing through a hole in a lead screen and entering a water tank. The exerimental hall is a box filled with vacuum.
MyDetPhysicsList is exactly the same as ExN03PhysicsList, and the run-macro sets the same verbosity of example/novice/N03/run1.mac
Running my application I experience several of the following:
The strange fact is that problems appear to occur in material with index idx=5, but there is no such a material, since I defined three materials only, and the Material-Cuts Couples seem to well behave.
Do I have to worry about this?
In attachments, the complete output file.
I am looking forward for suggestions and advices
|Inline Depth:||Outline Depth:||Add message:|