|Message: Re: GEANT470 G4StepLimiter||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
One more comment. G4UserLimits, which should be attached to a logical volume, is used by two speical processes, G4UserSpecialCuts and G4StepLimiter. G4UserSpecialCuts is a process to "artificially" kill a track once the track comes to a limit (e.g. minimum kinetic energy). On the other hand, G4StepLimiter limits the step length in case other processes propose the step length longer than the limit defined in G4UserLimits, but this second process never kills a track. Also, please note that G4UserLimits does not have any relation with the range cuts (a.k.a. production thresholds). In case you want to define a set of production thresholds to a region, you have to set it to a region, > aG4Region->SetProductionCuts( new G4ProductionCuts( 1.0*mm )); but you don't need to add any particular process.
|Inline Depth:||Outline Depth:||Add message:|