|Message: Re: he3 energy losses||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I am aware of the energy losses difference between he3 and tritons. Now, I have generated monoenergetic paricles. I have checked the energy losses of the 100 MeV he3-ions in 4 cm thick drift chamber (volume filled with a gas) and it is about 20 MeV (!!). Whereas for tritons it is 0.5 MeV. For the air layer of 300 mm i have got for 100MeV tritons energy loss about 1 MeV, whereas for he3 with the same energy about 30 MeV. I should have get about 4 MeV ... What should I do ?