|Message: GPS angular rotation not working||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I'm attempting to model a square GPS surface along the x-y plane. I then set up a user defined angular distribution (via a histogram of the values of theta).
No matter what I do to the ang/rot1 and ang/rot2 vectors, there is no change in particle behavior. Is this a feature of user defined angular distributions, or am I misunderstanding the rot1/rot2 commands?
/gps/pos/centre 0.0 0.0 17.0 m
/gps/pos/halfx 15.0 m
/gps/pos/halfy 15.0 m
/gps/pos/rot1 1 0 0
/gps/pos/rot2 0 1 0
# ang distr.
/gps/ang/rot1 1 0 0
/gps/ang/rot2 0 0 1
Thanks in advance for any help you can provide!
|Inline Depth:||Outline Depth:||Add message:|