|Message: Re: How to define a source with multiple radionuclides with different activities?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Thank you very much for your help on both questions. I am still a little confused as to where I input the activities though. In the example you sent me to look at it lists adding the intensity of each source, whereas the source I am trying to replicate is given in terms of activities. For example say my source is just Pb-210 and Co-60, and my activites are 100 Bq and 500 Bq, just randomly. Do I do the following:|
# For Pb-210
/gps/source add 500
Or is there some transformation I must perform to go from 100 and 500 Bq into some value for intensity, like a ratio. What I mean is the intensity ofPb-210 the ratio of (100 Bq)/(100 Bq + 500 Bq).
If you could clarify this for me I'd greatly appreciate it!
|Inline Depth:||Outline Depth:||Add message:|