|Message: How to generate flux?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I want to generate neutron flux(no. of neutrons/sq.cm-sec) using GPS. I want that if I am giving /run/beamOn 100 then 100 neutrons should incident at the detector surface at that instant.
I tried /gps/number 100 but it is showing that all 100 neutrons are going by same point though randomization is set on xy plane. Only Track ID(100) is interacting others (Track ID 0 to 99) are just passing through it.
//---Macro---- /gps/direction 0 0 1 /gps/pos/type Plane /gps/pos/shape Square /gps/pos/centre 0 0 -0.75 cm /gps/pos/halfx 0.5 cm /gps/pos/halfy 0.5 cm /gps/ene/mono 0.025 eV /gps/number 100 /run/beamOn 10
Any help would be appreciated.
Thanks & Regards
|Inline Depth:||Outline Depth:||Add message:|