|Message: Re: Are particles released all at once or serially?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
So right now my source is defined as: /gps/verbose 0 /gps/particle neutron # the incident surface is in the y-z plane /gps/pos/type Point /gps/pos/centre 0.0 0.0 0.0 m # # set the focusing point, default is (0, 0, 0) /gps/ang/type iso # the beam energy is 14.1 MeV /gps/ene/type Mono /gps/ene/mono 14.1 MeV /run/beamOn 100 based on your comments, that means particles are produced serially (entering the detector one at a time), correct? How would I configure GPS to generate particles all at once? thanks for feedback. matt
|Inline Depth:||Outline Depth:||Add message:|