|Message: Re: Random engine in multithreaded Geant4||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have a similar problem. I conducted the following experiment:
Isotropic x-ray source 6 MeV at a distance of 1.5 meters from the detector array.
Detector array consisted of 314 detectors of 1 mm.
Statistics collected for 40 vertical lines, for each line of 100 million events. As can be seen from the attachment figure for multithreaded mode appeared clearly visible horizontal lines.
RunAction contains the following code: long seeds; time_t systime = time(NULL); seeds = (long) systime; seeds = (long) (systime * G4UniformRand()); G4Random::setTheSeeds(seeds); // or G4MTHepRandom::setTheSeeds(seeds);
Systems: Ubuntu 14, Geant 10 patch 2. Altlinux, Geant 10 patch 1.
Attachment: http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2014/09/18/23.29-42828-sequential_mode.png http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2014/09/18/23.29-51622-multithreading_mode.png