|Message: GPS Point Source problem||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I'm having a problem trying to simulate multiple point sources located far (>100m) from my detector. I want restrict incident particles to within a cone shaped beam so that only the sensitive area of my detector is hit.
My problem is that incident particles hit the same point of my detector. Is there another way to define my desired particle beam where I restrict particles to reside within a defined cone?
Here is my commands used in my macro file:
# Set General Particle Source options # source one at x=525cm/gps/particle gamma /gps/verbose 0 /gps/type Point /gps/centre 525. 0. 15000.0 cm /gps/posrot1 -0.035 0. -1. /gps/posrot2 -0.035 0. -1. /gps/angtype cos /gps/angrot1 -0.035 0. -1. /gps/angrot2 -0.035 0. -1. /gps/maxtheta 0.038 deg /gps/energytype Mono /gps/monoenergy 2 MeV
Thanks for any help in advance.
|Inline Depth:||Outline Depth:||Add message:|