|Message: GPS Command ignored||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi, I am simulating a detector which require multiple microplanar beams originating from same source. Simulation runs fine with one source without using GPS ,however, when I try to run it using GPS it says </gps/hist/point ………… command not found. ****** command ignored. I have replaced G4ParticleGun with G4GeneralParticleSource in "PrimaryGeneratorAction". I am using spectrum in GPS which looks like this. /gps/particle gamma /gps/pos/type Plane /gps/pos/shape Rectangle /gps/pos/halfx 0.025 mm /gps/pos/halfy 0.0125 mm /gps/direction 0 0 1 # energy spectrum /gps/ene/type User /gps/ene/emspec True /gps/hist/type energy /gps/hist/point 1000 0 …………………….. /gps/hist/point 35000 4498 ……………………… /gps/hist/point 40000 120890 ………………………. /gps/hist/point 600000 15 /tracking/verbose 1 /run/beamOn 1000 Thanks in anticipation. Nirmal
|Inline Depth:||Outline Depth:||Add message:|