|Message: Simulation is getting killed||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I am running a code based on OpNovice example which has CsI scintillator coupled to Silicon Photodiode. I am calculating energy deposit, spectrum of optical photons generated in scintillator and the spectrum reaching to photodiode using event action, stepping action & stacking action classes.
My simulation works fine for primaries up to 1000 but as I go for 10000 primaries, simulation stuck after the end of last event and printing "killed" as shown in the attached image.
Please let me know the reason.
Thanks and regards
Attachment: http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2019/04/02/23.20-99610-For_1000_primaries.jpg http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2019/04/02/23.20-37087-For_10000_primaries.jpg
|Inline Depth:||Outline Depth:||Add message:|