|Message: Single solid with different optical boundary properties||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I am trying to simulate the propagation of optical photons in a crystal where one of the faces is ground, and the others are polished (this can improve the longitudinal response uniformity). The crystal is surrounded by a reflector, and has a readout at one of its end.
As far as I understood, the UNIFIED model can't simulate this case, since the crystal faces must either be all polished or ground. What would be the best way to do so?
Thanks for the advice
|Inline Depth:||Outline Depth:||Add message:|