|Message: Re: About the simulation of optical photon.||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
> i don't know how to left one side unpolished or no reflection.
You can specify this surface to be 'dielectric_metal', with a reflectivity of 0.
> want to get the optical photon counts through the side what can i do to > make it possible or is there any example that can do the job?
and efficiency = 1, see for example:
To count the photons, you can implement code similar to:
where what is relevant is only that you require the case of 'Detection' and count; e.g. you don't necessarily have to implement the sensitive detector/hits mechanism.