|Message: Example novice N06||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi everyone, I am quite new to modeling in geant4. I had started to run a few examples as provided in the downloaded package in geant4. While running ExampleN06 in Novice section, I had tried to interchange the water tank with the air bubble, i.e. making it air tank and water bubble. I was interested in observing the scintillation effects mainly. However, after interchanging the volumes, I am not quire getting the expected results. Increasing/Decreasing the size of the bubble is not helping. I had even changed the water bubble with materials such as CDWO4, NaI etc. having better Scintillation properties but with no help. Infact while visualization I find the photon reflects back from the surface boundary between the tank and the bubble. Am I missing out any point during modeling ??? I have checked all the classes and they all seem to be fine. Kindly help.
regards, S. Banerjee