|Message: Re: case when child volume not entirely inside mother volume||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I also went through some of the other posts, and came across this:
I made the corrections suggested by the comments in the above post to G4Navigator.cc. Now, I see that if the fiber surface and the scintillator surface coincide, i.e., if the fiber is placed within the scintillator such that the surface of the fiber exposed to the world coincides with the surface of the scintillator exposed to the world, then, the reflections are taking place well.
However, this does not enable me to keep the fibers half protruding from the scintillator - I read that geant4 does not allow for daughter volumes to protrude out of the mother volumes. So, is the only way I can achieve this is by using G4SubtractionSolid to remove semi-circular portions on the slab surface and then place the fibers there (their mother volume now being "world") ?
Thanks in advance,
|Inline Depth:||Outline Depth:||Add message:|