|Message: case when child volume not entirely inside mother volume||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have a scintillator volume, in which I place some fibers, such that the fibers are only half inside the scintillator, ie., they are meant to be placed in semi-circular grooves. So, one half of each of the fibers is in contact with the scintillator while the other half is in contact with the "world" volume. To simulate a Tyvek wrapping, I set the surface between scintillator and world as groundbackpainted, and also the surface between each fiber and the world also groundbackpainted.
However, only the surface between the scintillator and the world is behaving as expected, while the photons are escaping into the world volume through the fibers.
I would like to know what is wrong in my approach, and how to rectify the mistakes.
Thanks in advance,
|Inline Depth:||Outline Depth:||Add message:|