|Message: Optical photon processes in Geant220.127.116.11||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I just updated to Geant18.104.22.168 from elder version Geant4.9.3.p01, following the guides of configuration and installation. GEANT4_INSTALL_DATA is set to ON and other options are set by default.
My simulation codes include the optical photon processes and remain unchanged during the Geant4 update. The problem is that no photons are generated in Geant22.214.171.124 (energy deposition of electron passing through the Cherenkov radiator is proper) while the same simulation codes work well in Geant4.9.3.p01.
For debugging, I have also tried example/novice/N06 in Geant126.96.36.199 and still no optical photons are produced.
There could be something wrong with my settings or are there any other hints? Thank you very much.
Greetings, Liu, Yong
|Inline Depth:||Outline Depth:||Add message:|