|Message: Lambertian reflector||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I am wondering, if there is a possibility to build a lambertian reflector in a "specified" distance around a scintillator, which is coupled to a photodiode? It should work in the unified model, because the glisur model doesn't include lambertian reflection. In the unified model it is possible to place the scintillator in another volume and define a reflector for this volume. But the problem is that one side of the scintillator is connected to the photodiode and should not be covered with a reflector. I don't want to use the groundbackpainted option of the unified model, because the distance between the scintillator and reflector can't be defined here.
Thanks for your help.
|Inline Depth:||Outline Depth:||Add message:|