|Message: Re: StepTooSmall||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
> My /tracking/verbose is set to 0
Well, then set it to 1. If you do you'll see exactly what steps the navigator is taking.
Anyway, if you have the cladding with rmin=0 you need to put the fiber inside the cladding (fiber becomes a daughter volume of the cladding) when you build the geometry. This is perferable to setting the rmin of the cladding to be rmax of the fiber and putting both as volumes into the world. Please, follow the wls example and make sure your geometry is build correctly.
|Inline Depth:||Outline Depth:||Add message:|