|Message: Simulation is blocked||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I am using geant4 for x ray imaging physics purpose. When I irradiate the fluorescence screen Gd2O2S with X Rays, optical photons are created in Gd2O2S and spread into the Silicon where they must be detected. Silicon is divided into 1152 x 1254 pixels and the size of each pixel is 50 x 50 um. The program works well and I get the image of the object which I would like to image, but I am still having the following problem: If I want to get an image of high quality I have to irradiate the detector with 200 millions of X rays or 500 millions etc... I irradiated the detector with only 100 millions of X Rays and the calculation started running on my work station but after some hours the calculation was blocked and did not continue! Does anybody know why? I highly appreciate your suggestions and helps and thank you in advance.