|Message: Emission spectrum of scintillator||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I am trying to insert an emission spectrum of scintillator (pure CsI) and I met one problem.
From the data sheet of this scintillator I found that emission spectrum wavelength is starting in the UV, approximately [250-600]nm with an emission maximum at 315 nm.
Thus, my question: is there the proper way to enter the mentioned above spectrum?
When I tried to enter it, I got the warning -message that the maximum Energy of optical photon is 4.2 eV (which corresponds to app. 290 nm).
*** G4Exception : OutOfRange issued by : G4MaterialPropertyVector::GetProperty() Attempt to retrieve property above range ! *** This is just a warning message. aPhotonEnergy = 4.6617652e-06 [MeV] PMmax = 4.2e-06 [MeV]
Thank you very much!
|Inline Depth:||Outline Depth:||Add message:|