|Message: Re: Stuck on error with optical photons||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Thanks for the advice. In investigating further, I realized that the offending particle is actually a bremsstrahlung gamma (I'm unfamiliar with the optical modeling, so I assumed that was the culprit). The track stayed within the volume in which it originated for the duration of its flight, but that volume is a G4SubtractionSolid, and it did pass within a few tenths of a mm of the notch in the solid. (I have no idea if that is at all relevant.) I can control the problem by checking to make sure that direction is not nan in the UserSteppingAction and resetting it, but there is obviously something that I'm still doing wrong.
|Inline Depth:||Outline Depth:||Add message:|