|Message: coupling an optical G4Tubs to an optical G4Torus||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Does anyone have any experience coupling a G4Tubs to a G4Torus? I can't seem to get my optical photons to cross the boundary. The geometry is sound, and i've specified a large enough radius so that I'm not restricted to bending losses (i.e. > 1 meter). The fibers are WLS fibers and all the refractive indices are defined for both the straight fiber (G4Tubs) and the curved fiber (G4Torus).
Has anyone worked with optical photon transport in curved fibers?
|Inline Depth:||Outline Depth:||Add message:|