|Message: Re: general questions regarding G4LogicalBorderSurface||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I'm also trying to set up a solid with different optical interfaces to other parts in GEANT4.
You write that one simply has to place the solids with their dielectric interfaces next to each other.
However, it seems that I need to have the solids overlapping by a certain amount to get a direct transportation from one into the other, without going into the mother volume inbetween.
I read that overlapping volumes are always a bad idea and may screw up the navigation code in GEANT4.
Is there something I could have done wrong here or is it ok to have a slight overlap for optical interfaces?
|Inline Depth:||Outline Depth:||Add message:|