|Message: Re: Optical problem with geometry subtraction||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I had exactly the same problem than Withney. I used a trick to solved it... in the file G4OpBoundaryProcess.cc: in the G4OpBoundaryProcess::PostStepDoIt method, I skip the boundary process for the specific case of the involved volumes (and in the right order). If HDPE and vacuum are the material of the two volumes after the reflection then:
G4StepPoint *pPreStepPoint = aStep.GetPreStepPoint(); G4StepPoint *pPostStepPoint = aStep.GetPostStepPoint(); if ((pPostStepPoint->GetStepStatus() == fGeomBoundary) && (pPreStepPoint->GetPhysicalVolume()->GetLogicalVolume()->GetMaterial()->GetName() == "HDPE") && (pPostStepPoint->GetPhysicalVolume()->GetLogicalVolume()->GetMaterial()->GetName() == "Vacuum")) return G4VDiscreteProcess::PostStepDoIt(aTrack, aStep);
The track is not killed anymore... it is a bit dangerous and radical... but well, this is the only way I found!
best regards, Alexandre.
|Inline Depth:||Outline Depth:||Add message:|