|Message: Re: surface with 98% reflection and 2% transmission of optical photons||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
for again being rather late in responding. As far as dielectric_metal surfaces are concerned, in 9.5, you still have to edit the source to replace 'Absorption' with 'Transmission'. The source retains the comments advising you what to do:
What has happend in the meantime is that you may specify a wavelength dependent TRANSMITTANCE for a dielectric_dielectric surface. If this is specified for a surface it overwrites the Snell's law's probability. This allows the simulation of anti-reflective coatings. Thanks goes to Evgueni Goudzovski (CERN) for the idea.
I haven't come up yet with a 'transpartant' way to toggle transmission for absorption in the case of a dielectric_metal surface and so left it to you to change the code itself.
Best regards, Peter
|Inline Depth:||Outline Depth:||Add message:|