|Message: How to run MedLinac2 faster?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hello, I tested the example in advanced folder called medical_linac,I have modified the batch.mac as follows, i set the second parameter /pahntom/centre 0 0 0 and /accelerator/ratationX 0 deg, ,and set the /general/bBeam 2100000000 #2.1 billion and use the phaseSpace as particle source. it takes me about four days to finish one simulation.It is a little too long.and the data of the figure shows a little terrible. the figure drew by matlab attached
Anyone who can offer me some detailed description? and can the MedLinac2 be run by multi-thread ? if it do, it is very kind of you to tell me how to do,Thanks a lot.
|Inline Depth:||Outline Depth:||Add message:|