Message: Re: Example N02 Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

None Re: Example N02 

Forum: Medical Applications
Re: Question Example N02 (Leila Moghadasi)
Re: None Re: Example N02 (John Allison)
Re: None Re: Example N02 (Leila Moghadasi)
Re: None Re: Example N02 (John Allison)
Re: None Re: Example N02 (Leila Moghadasi)
Date: 16 Dec, 2011
From: John Allison <John Allison>

Dear Leila

If you look inside vis.mac you will see that there is a /run/beamOn command in there, so my earlier advice (to type "/run/beamOn") was ill-informed. Apologies for this. You certainly *should* have seen trajectories, as you first thought.

You may have seen threads in the Visualisation Forum on a similar phenomenon, but in reverse - trajectories visible but detector not visible. This invariably means that the software graphics driver and the graphics hardware are not matched. When you install an operating system it tries to match them but often finishes up using a default generic software driver. Maybe your problem is similar, so please check that you have the proper software graphics driver. Find out exactly what your graphics hardware is and then browse the net for a software driver and install it.

Good luck.

 Add Message Add Message
to: "Re: Example N02"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews


[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]