Message: Re: root output Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

None Re: root output 

Forum: Medical Applications
Re: None root output (riazi)
Date: 04 May, 2010
From: Zhenwei Yang <>

Hi Riazi,
I did not try this example, but according to the README file( as following),
AIDA should be installed. I am not sure whether this is the case or not.
(I have never try AIDA)



The output is an .hbk file and a .root files. The files are  produced
if the variable G4ANALYSIS_USE is set to 1 and the analysis tool (AIDA
interface) correctly installed.

2010/5/5 riazi <>:
> *** Discussion title: Medical Applications
> Dear Geant4 experts
> thanks you in advance to answer my questions. I installed the
> Osc-vis-source-16.9 after installing CLHEP and before the geant4.9.3.p01
> in my system. the aida-config and osc-plot works properly and I set the
> G4ANALYSIS_USE=1, but the new installed geant4.9.3.01 hadrontherapy
> example couldn't produce the root format DoseDistribution output. have I
> missed another setting? before in geant4.9.3 the DoseDistribution.root
> file is produced.
> With Best Regards Riazi
> -------------------------------------------------------------
> Visit this GEANT4 at message (to reply or unsubscribe) at:

Zhenwei YANG
Room 804, XinGongWuGuan Building
Department of Engineering Physics
Tsinghua University
Beijing 100084, CHINA
Tel:  +86-10-6279-4908
Fax: +86-10-6279-2296

 Add Message Add Message
to: "Re: root output"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews

[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]