|Message: Re: Fluence in Hadrontherapy||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
the actual public version of the Hadrontherapy program does not permit the calculation of the fluence. If you give a look, in fact, in the Hadrontherapy pages (http://g4advancedexamples.lngs.infn.it/Examples/hadrontherapy) and in the on-line manual there linked, you can see that the possibility to retrive the fluece for the primary beam as well as for the produced secondaries, is not still included. This feature will be probably included in the next release togheter with the possibility to calculate the particles LET.
If you want I can send you the necesary (but not still fully tested) class files to perform this calculation.
Hoping I give a clear answer, let me know if you need help,
Pablo CirroneOn Sat, 23 Jan 2010 12:40:44 GMT, riazi wrote:
> Dear Sir/Madam > > would you mind please advise me how I can score the fluence of primary > and secondary particles in detectors in hadrontherapy example?. > > Sincerely Riazi >
|Inline Depth:||Outline Depth:||Add message:|