|Message: Segmentation fault while running example B1||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Thank you all for helping me through my installation of GEANT4
I successfully installed geant4 by using following cmake and make commands
cmake -DCMAKE_INSTALL_PREFIX=/home/aqsa/Downloads/GEANT4/geant4.10.04.p02-build -DGEANT4_INSTALL_DATA=OFF -DGEANT4_INSTALL_DATADIR=/home/aqsa/Downloads/GEANT4_DATA_FILES/G4ENSDFSTATE2.2 -DGEANT4_INSTALL_DATADIR=/home/aqsa/Downloads/GEANT4_DATA_FILES/G4ABLA3.1 -DGEANT4_INSTALL_DATADIR=/home/aqsa/Downloads/GEANT4_DATA_FILES/G4NDL4.5 -DGEANT4_INSTALL_DATADIR=/home/aqsa/Downloads/GEANT4_DATA_FILES/G4NEUTRONXS1.4 -DGEANT4_INSTALL_DATADIR=/home/aqsa/Downloads/GEANT4_DATA_FILES/G4EMLOW7.3 -DGEANT4_INSTALL_DATADIR=/home/aqsa/Downloads/GEANT4_DATA_FILES/G4PII1.3 -DGEANT4_INSTALL_DATADIR=/home/aqsa/Downloads/GEANT4_DATA_FILES/G4SAIDDATA1.1 -DGEANT4_INSTALL_DATADIR=/home/aqsa/Downloads/GEANT4_DATA_FILES/G4TENDL1.3.2 -DGEANT4_INSTALL_DATADIR=/home/aqsa/Downloads/GEANT4_DATA_FILES/PhotonEvaporation5.2 -DGEANT4_INSTALL_DATADIR=/home/aqsa/Downloads/GEANT4_DATA_FILES/RadioactiveDecay5.2 -DGEANT4_INSTALL_DATADIR=/home/aqsa/Downloads/GEANT4_DATA_FILES/RealSurface2.1.1 -DGEANT4_USE_QT=ON -DGEANT4_USE_OPENGL_X11=ON -DGEANT4_USE_RAYTRACER_X11=ON -DGEANT4_USE_GDML=ON -DGEANT4_USE_SYSTEM_CLHEP=OFF -DGEANT4_USE_SYSTEM_EXPAT=OFF -DGEANT4_BUILD_MULTITHREADED= ON -DGEANT4_USE_G3TOG4=ON -DGEANT4_INSTALL_DATA_TIMEOUT=3600 /home/aqsa/Downloads/GEANT4/geant4.10.04.p02
Now when I am trying to run the example B1 I am getting the following error.
./exampleB1 Available UI session types: [ Qt, GAG, tcsh, csh ] Segmentation fault (core dumped)
I am unable to understand what might be wrong with my GEANT4 since this error does not contain any information about the cause of core dumped.
I had used the following commands to build and run example B1
cmake -DCMAKE_PREFIX_PATH=/home/aqsa/Downloads/GEANT4/geant4.10.04.p02-build ../B1
I would mention the qmake version, just in case needed,
QMake version 2.01a Using Qt version 4.8.7 in /usr/lib64
OS : CentOS 7, gcc 4.8.5, cmake version 3.12.0
|Inline Depth:||Outline Depth:||Add message:|