|Message: Segmentation fault in MT mode with fresh install of Geant4.10.03.p01||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have recently updated to Geant4.10.03.p01 and have a problem with running applications in multithreaded mode with visualization through OpenGL/MesaGL (batch mode seems to run fine, and sequential mode also runs fine with visualization).
Specifially, if I run ./example B1 and then input on state idle> /control/execute run1.mac, the output near the end of the program gets a segmentation fault:
--------------------End of Global Run----------------------- The run consists of 100 Cumulated dose per run, in scoring volume : 4.09963 picoGy rms = 1.19418 picoGy ------------------------------------------------------------
WARNING: 100 events have been kept for refreshing and/or reviewing.
"/vis/reviewKeptEvents" to review them one by one. "/vis/viewer/flush" or "/vis/viewer/rebuild" to see them accumulated. Segmentation fault
When I run the macro in batch mode (./exampleB1 run1.mac) there is no segmentation fault and it runs fine all the way through to exiting.
If anyone has any thoughts on what could be happening (e.g. requirements my system could be failing to meet?) I would very much appreciate some input.
PS: I run Scientific Linux 6.9, CMake is version 3.8.0 and I use the devtoolset-6 gcc compiler which is version 6.2.1.
$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
$ glxinfo | grep OpenGL OpenGL vendor string: Intel Open Source Technology Center OpenGL renderer string: Mesa DRI Intel(R) Haswell Desktop OpenGL version string: 2.1 Mesa 11.0.7 OpenGL shading language version string: 1.30 OpenGL extensions:
|Inline Depth:||Outline Depth:||Add message:|