|Message: Re: Fatal Exception *** core dump in rdecay02 compilation on Geant126.96.36.199||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
On Wed, 28 Sep 2016 09:41:22 GMT, PENABEI Samafou Benjamin wrote:
> > ./rdecay02 > > -------- EEEE ------- G4Exception-START -------- EEEE ------- > *** G4Exception : PART70000 > issued by : G4NuclideTable > G4ENSDFSTATEDATA environment variable must be set > *** Fatal Exception *** core dump *** > -------- EEEE -------- G4Exception-END --------- EEEE ------- > > *** G4Exception: Aborting execution *** Aborted (core dumped)
As the error message says, the "environment variable must be set." After you do the build and install, you need to make sure that your session has all the necessary Geant4 envvars set to match that installation. See the Installation Guide Section 3.3.
-- Michael Kelsey
|Inline Depth:||Outline Depth:||Add message:|