|Message: Re: Geant4/Qt installation error||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Thanks for the tip. Normally you should not edit Geant4interfaceOptions.cmake, all could be done by the cmake command options. Running: cmake -DCMAKE_INSTALL_PREFIX=/Users/carolinacechinel/software/geant4.10.02.p01-install -DGEANT4_INSTALL_DATA=ON -DGEANT4_USE_QT=ON -DCMAKE_PREFIX_PATH=/Users/carolinacechinel/software/Qt/5.6/clang_64/lib/cmake -DGEANT4_USE_SYSTEM_EXPAT=OFF /Users/carolinacechinel/software/geant4.10.02.p01
should have been enought.