|Message: Re: Compiler check with CMake||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Just copying your mail here for info (not sure why it didn't get posted here as it was sent to the correct address!):
Thanks for reply, Ben. Here's the log files you requested. For compiling cmake, I used "./bootstrap --prefix=/PATH/" and for geant4 "cmake ../ -DCMAKE_CXX_COMPILER=g++ -DCMAKE_C_COMPILER=gcc" The log files for cmake is https://gist.github.com/geniejhang/4c205da17ce14bdf42a9 and for geant4 https://gist.github.com/geniejhang/6263f10e35288ed64ce1 After I mailed to this mailing list, I also found that it happens with compiling ROOT as well. So, I might submit a ticket to CMake support too. The same problem happened during cmaking FairRoot while checking compiler. (Highlighed lines) https://github.com/FairRootGroup/FairRoot/blob/master/cmake/modules/CheckCompiler.cmake#L125-L160 Thank you for your help always. Bests Genie
O.k., this is down to a small bug in the Geant4
I've attached a patch for this, which will also be in the upcoming 10.2 release (next week).