|Message: Re: Geant4 can't find OpenGL after installation||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
On Fri, 11 Jul 2014 16:16:02 GMT, junhui.works wrote:
> Hi, > > After installing Geant4 on a linux machine(SL6.5), I found I can't run > it in graphic model, while it worked well in text model. Therefore I > posted my question to the GUI sub-forum. Having followed suggestions > there, unfortunately I still can't fix the problem. And John suggested > me to ask around here. > > I copied my latest post in the GUI sub-forum in the following and the > link is here : > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/userinterface/112/1/1.html > > Thanks ! > > Best, Junhui > > **************** My latest post in GUI sub-forum > *************************** > > I've followed your suggestion(s) : started to re-install the geant4 > again, in new created directories. The problem unfortunately is still > same as before . > > There is one thing I probably should mention a little bit also, which is > during the re-building the geant4, I used this command which closed > external "EXPAT"(this technique has been searched from this forum also). > I have no clue if this "close" play a negative role to the OPENGL / QT > or not. > > Besides, I have one question : does SL6.5 include OPENGL internally or > not ? If not, maybe I need do download and install it ? > > Thanks ! > > Best, Junhui > >  > You have successfully registered the following graphics systems. > Current available graphics systems are: > ASCIITree (ATree) > DAWNFILE (DAWNFILE) > G4HepRep (HepRepXML) > G4HepRepFile (HepRepFile) > RayTracer (RayTracer) > VRML1FILE (VRML1FILE) > VRML2FILE (VRML2FILE) > gMocrenFile (gMocrenFile) >  > cmake -DCMAKE_INSTALL_PREFIX=/home/junhui/geantf/geantf_install /home/junhui/geantf/geant4.10.00.p02 -DGEANT4_INSTALL_DATA=ON -DGEANT4_USE_SYSTEM_EXPAT=OFF >
################# Second message ###################
New results on diagnosing the problem. (1). During the installation, if I include the "-DGEANT4_USE_OPENGL_X11=ON" in the command, the error is "Could not find X11". See 
(2). When I tried to install X11, the system says it's X11 has been installed. See .
Can any people comment a little bit ? Thanks !
 [junhui@damic-qf Gfbuild]$ cmake -DCMAKE_INSTALL_PREFIX=/home/junhui/Geantf/Gfinstall -DGEANT4_BUILD_MULTITHREADED=ON -DGEANT4_INSTALL_DATA=ON -DGEANT4_USE_OPENGL_X11=ON -DGEANT4_USE_SYSTEM_EXPAT=OFF /home/junhui/Geantf/geant4.10.00.p02 -- The C compiler identification is GNU 4.4.7 -- The CXX compiler identification is GNU 4.4.7 -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Performing Test HAVE_TLS -- Performing Test HAVE_TLS - Success CMake Error at /usr/local/share/cmake-3.0/Modules/FindX11.cmake:440 (message): Could not find X11 Call Stack (most recent call first): cmake/Modules/Geant4InterfaceOptions.cmake:188 (find_package) CMakeLists.txt:83 (include)
 [root@damic-qf softwares]# yum install xauth
Loaded plugins: refresh-packagekit, security
Setting up Install Process
Package 1:xorg-x11-xauth-1.0.2-7.1.el6.x86_64 already installed and latest version
Nothing to do
|Inline Depth:||Outline Depth:||Add message:|