|Message: Re: Error with GNUMakefile||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
On Wed, 12 Mar 2014 17:12:56 GMT, Neil Fazel wrote: > Hi Ben, > > Thanks for the information. Right now I'm able to build using cmake whereas > gmake fails, so I'm motivated to switch. You mentioned that one can have a "build > directory that is configured to use Geant4 9.6, one using 10.0, ...". How does > one do that? I tried it, but replacing > > cmake -DGeant4_DIR=path_to_Geant4_installation/lib/Geant220.127.116.11/ ../exampleXYZ > > with > > cmake -DGeant4_DIR=path_to_Geant4_installation/lib/Geant4.9.6/ ../exampleXYZ > > before rebuilding wasn't enough to switch from 4.10 back to 4.9, i.e. the code was > still linked with 4.10. > (A thought: for 4.10, I source > > path_to_Geant4_installation/Geant4.10/bin/geant4.sh > > Is there something similar for 4.9?)
I suspect that if by "still linked with 10" (NB the "4" is part of the name, not a version!) you mean that running the application still uses the 10.0 libraries, it's because you sourced that script. This sets
If you want to ensure a given application uses a specific set of libraries, you'll need to look at the CMake rpath settings, documented here. However, note that using RPATH is not a hard guarantee as it is always overidden by
> When installing using cmake, 'make install' attempted to install in /usr/local/bin/, > which is not a user directory (no write permission). It seems I need to set > CMAKE_INSTALL_PREFIX; does that require editting CMakeLists.txt or CMakeCache.txt?
You can set that on the command line, i.e. using
|Inline Depth:||Outline Depth:||Add message:|