|Message: Problems with Ex. B1 after Geant4 9.6 installation on Ubuntu 12.04||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have installed Geant4 9.6 on Ubuntu 12.04 via
cmake -DCMAKE_INSTALL_PREFIX=/home/fka/geant/geant-install -DGEANT4_INSTALL_DATA=ON -DGEANT4_USE_OPENGL_X11=ON /home/fka/geant/geant4.9.6.p02
and it built and installed fine (including downloading the required data that were put in /home/fka/geant/geant-install/share/Geant4-9.6.2/data
when I run example B1 cmake -DGeant4_DIR=/home/fka/geant/geant-install/lib/Geant4-9.6.2 /home/fka/geant/geant4.9.6.p02/examples/basic/B1/
it all goes according to plan, but executing ./exampleB1 gives me
*** Fatal error: Missing mandatory data for this simulation engine *** *** Fatal Exception *** core dump ***-------- EEEE -------- G4Exception-END --------- EEEE ------- *** G4Exception: Aborting execution *** Aborted (core dumped)
despite the fact that the data is correctly located in the correct directory. I also checked geant.sh in the geant-install/bin directory and it seems to point to the correct location.
I tried re-running cmake -DGEANT4_INSTALL_DATA=ON but that did not change the problem.
I appreciate any tips. Thanks
|Inline Depth:||Outline Depth:||Add message:|